Blowguns Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
new here

Can I use this blowgun extension with this take-down blowgun? The extension description says its compatible with the #B6255 which is the cs 5 foot model but I don't see why it shouldn't work with the take-down model as well. I'm looking for a range of 30m with practice.
 

·
Registered
Joined
·
491 Posts
Welcome to the forum. The answer to your question is Yes. The extension is compatible withe the two piece model and the standard 4 foot and 5 foot models. It is NOT compatible with the heavier Pro Model blowguns.
 

·
Registered
Joined
·
165 Posts
Welcome to the forum. The answer to your question is Yes. The extension is compatible withe the two piece model and the standard 4 foot and 5 foot models. It is NOT compatible with the heavier Pro Model blowguns.
Kikko, that is a pretty good price on the BG as the CS site lists them just under 50 bucks now. They've gone up quite a bit. I bought mine a little over a year ago at 29 dollars US.

Hey Treefork, it is my understanding that you and I both have the 5 foot two piece model. With them they have a threaded coupler to join the two main tubes together by screwing one into the other. Question; How do these extensions align and secure themselves to the end of the BG? They can't screw on because the BG tubes are not threaded in those areas. And how well do they align? Thanks

Teach
 

·
Registered
Joined
·
491 Posts
The extension has a coupler that slides on and holds by friction. It aligns really well. I haven't leak checked it to see how air tight it is. The 5 foot length feels good to me so I rarely use the extension. I don't see a huge benefit to the extension. Just my opinion. Maybe someone with more lung capacity than myself would benefit more.

A side note : I purchased two extensions with the intent of contructing a two piece 4 foot model . I have not tested it yet. I will post up when I run it through testing. Seemed like a good idea to have a fast compact take down big bore .
 

·
Registered
Joined
·
165 Posts
If the extensions are 2 feet? Yes? You could have a two foot main tube with combinations of 4 feet and 6 feet. The latter by adding a second extension to the opposite end.
 
1 - 6 of 6 Posts
Top